This device is a reducing instrument designed for a wide range of duties, characterised by its segmented blade that enables for simple snapping off of lifeless segments to disclose a contemporary, sharp edge. Its building incorporates a strong deal with, typically with an ergonomic design, to reinforce grip and management throughout use. The mannequin designation specifies specific options resembling blade width, total dimensions, and the producer’s designation for a selected product line recognized for its sturdiness and efficiency.
The utility of any such instrument lies in its skill to keep up a persistently sharp reducing floor with out the necessity for sharpening. This function reduces downtime and enhances effectivity throughout a variety of functions, from building and DIY initiatives to normal goal reducing duties. Its improvement displays an evolution in reducing device design, prioritizing person comfort, security, and longevity. The particular mannequin typically represents developments in supplies and building strategies, bettering its resistance to put on and tear in demanding environments.
The next sections will element the parts, functionalities, and functions of any such device, offering a complete overview of its options and its position throughout various industries.
1. Blade segmentation
Blade segmentation is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design function immediately influences the device’s usability, upkeep, and total lifespan, contributing considerably to its enchantment in each skilled and DIY functions.
-
Constant Sharpness
The segmented blade design permits the person to reveal a contemporary, sharp innovative by snapping off a boring phase. This eliminates the necessity for sharpening, sustaining constant reducing efficiency all through the blade’s lifespan. As an illustration, when reducing by means of drywall or cardboard, the preliminary phase might change into blunt; snapping it off instantly restores optimum reducing functionality.
-
Blade Financial system and Longevity
The segmented design successfully extends the lifetime of the blade. As a substitute of discarding a blade when it turns into boring in a single space, solely the worn phase is eliminated, maximizing the utility of your complete blade. This design facet will increase the product’s worth proposition by lowering the frequency of blade replacements. Utilizing the total potential of the blade reduces waste and creates price effectivity.
-
Security Concerns
Whereas blade segmentation gives benefits, it additionally introduces particular security issues. The act of snapping off a phase requires cautious execution to forestall damage. The uncovered blade edge after snapping may be significantly sharp and requires warning. The design of the snap-off mechanism itself have to be strong to make sure the blade breaks cleanly and predictably. Poor-quality instruments with unreliable snap-off mechanisms can pose a security hazard.
-
Materials Composition and Manufacturing
The effectiveness of blade segmentation is contingent upon the fabric composition and manufacturing technique of the blade. Excessive-quality metal and exact segmentation are important for clear, predictable breaks. The particular metal used within the Stanley 10-817 25mm FatMax Xtreme is chosen for its skill to keep up sharpness and snap cleanly alongside the pre-scored traces.
In abstract, blade segmentation is integral to the design and performance of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design impacts the device’s usability, upkeep necessities, security issues, and total financial worth. These components collectively affect its widespread adoption throughout various person teams.
2. Ergonomic deal with
The ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme snap-off knife represents an important design factor that immediately impacts person expertise, security, and effectivity. Its significance stems from the extended and sometimes repetitive nature of duties for which such instruments are employed. A poorly designed deal with can result in discomfort, hand fatigue, and an elevated danger of damage, whereas an ergonomically sound design mitigates these dangers, permitting for prolonged use and enhanced precision. The FatMax Xtreme sequence, particularly, emphasizes a deal with designed for a safe and cozy grip, even beneath demanding circumstances.
The form, materials, and floor texture of the deal with all contribute to its ergonomic properties. Contoured grips that conform to the pure form of the hand cut back pressure on particular strain factors. Overmolded supplies, resembling rubber or textured polymers, improve grip and forestall slippage, significantly in moist or oily circumstances. The deal with’s dimension can also be important; it have to be giant sufficient to supply satisfactory buy however not so giant as to trigger hand fatigue. As an illustration, tradespeople incessantly use these knives for reducing supplies like drywall, flooring, and roofing felt. An ergonomic deal with permits them to carry out these duties for prolonged intervals with out creating hand or wrist ache, which interprets to elevated productiveness and diminished danger of work-related accidents.
In conclusion, the ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme just isn’t merely an aesthetic function however a vital part that contributes on to person well-being and operational effectiveness. By lowering pressure and enhancing grip, the ergonomic design permits for safer, extra comfy, and extra productive use of the device. This design consideration underscores the significance of contemplating human components in device design, significantly in skilled settings the place repetitive duties are widespread.
3. Blade Width (25mm)
The 25mm blade width of the Stanley 10-817 FatMax Xtreme snap-off knife is a key specification figuring out its utility throughout numerous functions. This dimension just isn’t arbitrary; it’s intentionally chosen to steadiness reducing capability, blade sturdiness, and precision, influencing the kind of supplies that may be successfully processed and the general efficiency of the device.
-
Slicing Capability and Materials Suitability
The 25mm blade width gives a considerable innovative, enabling the device to effectively slice by means of thicker supplies in comparison with narrower blade options. This width is appropriate for reducing duties involving drywall, cardboard, leather-based, and a few varieties of plastic. The broader blade additionally distributes pressure throughout a bigger space, lowering the chance of blade breakage when encountering resistance. Nevertheless, the elevated width might restrict the device’s maneuverability in tight areas or when performing intricate cuts that require finer management. For instance, whereas it excels at scoring drywall, it will not be the optimum selection for delicate crafting duties.
-
Blade Stability and Sturdiness
A wider blade inherently affords better stability throughout reducing operations. The elevated floor space gives enhanced resistance to bending and deflection, leading to straighter and extra managed cuts. That is significantly related when reducing supplies that are inclined to shift or buckle beneath strain. The 25mm width additionally contributes to the blade’s total sturdiness, as it may possibly stand up to better stress earlier than fracturing or dulling. The Stanley FatMax Xtreme sequence, particularly, is engineered for heavy-duty use, and the 25mm blade width enhances this design philosophy by guaranteeing the blade can endure the trials of demanding jobsite circumstances.
-
Power Software and Ergonomics
The blade width immediately influences the quantity of pressure required to provoke and keep a lower. A wider blade necessitates better pressure to penetrate the fabric, particularly if the blade just isn’t exceptionally sharp. This could have ergonomic implications, as customers might must exert extra effort, probably resulting in fatigue over extended use. Due to this fact, the deal with design and total ergonomics of the Stanley 10-817 are essential for mitigating these results, permitting customers to comfortably apply the mandatory pressure with out undue pressure.
-
Relationship to Snap-Off Segmentation
The 25mm blade width works in live performance with the snap-off segmentation design. This width gives ample materials for a number of segments, every providing a contemporary innovative as wanted. The segmentation intervals are designed to optimize the usage of the blade materials whereas sustaining enough structural integrity for every phase. The 25mm width permits for a steadiness between the variety of segments and the sturdiness of every phase, contributing to the general longevity and worth of the blade. The effectivity of the snap-off mechanism is important to completely notice the advantages of this design.
In summation, the 25mm blade width is a defining attribute of the Stanley 10-817 FatMax Xtreme snap-off knife, influencing its reducing capability, sturdiness, ergonomics, and the effectiveness of its snap-off segmentation. This dimension is fastidiously thought of to optimize the device’s efficiency throughout a broad vary of functions, solidifying its place as a flexible and dependable reducing instrument.
4. Sturdiness
Sturdiness is a paramount consideration within the design and number of any reducing device, and it performs a very important position in evaluating the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This attribute dictates the device’s lifespan, its skill to face up to demanding work environments, and its total worth proposition. The “FatMax Xtreme” designation itself suggests an emphasis on robustness and longevity.
-
Materials Composition and Development
The sturdiness of the Stanley 10-817 stems from the supplies utilized in its building. Excessive-carbon metal is commonly employed for the blade to supply a steadiness of hardness and toughness, resisting put on and fracture. The deal with usually incorporates impact-resistant polymers or composite supplies designed to face up to drops, impacts, and publicity to harsh chemical compounds or solvents. The standard of the supplies and the precision of the manufacturing processes immediately have an effect on the device’s skill to endure extended use and opposed circumstances. As an illustration, a building employee utilizing the knife each day on a job web site requires a device able to withstanding fixed abrasion and potential unintentional impacts.
-
Blade Section Integrity and Break Resistance
The snap-off design necessitates a blade with fastidiously engineered segmentation. The integrity of those segments and their resistance to untimely breakage are essential for sturdiness. A blade that snaps prematurely or fails to interrupt cleanly compromises security and reduces the device’s usability. The design and manufacturing processes should guarantee constant and predictable breaking factors whereas sustaining the power of every phase. When reducing thick cardboard or a number of layers of fabric, a blade with weak segments would rapidly change into unusable, highlighting the significance of phase integrity.
-
Deal with Ergonomics and Structural Integrity
Whereas the ergonomic design of the deal with contributes to person consolation, it additionally impacts the device’s total sturdiness. A deal with that’s poorly connected or susceptible to cracking beneath stress will render the device unusable, whatever the blade’s situation. The deal with have to be securely mounted to the blade housing and able to withstanding important pressure with out deformation or failure. Tradespeople making use of substantial strain to the knife whereas reducing by means of dense supplies require a deal with that maintains its structural integrity, stopping slippage or breakage.
-
Corrosion Resistance
Publicity to moisture and corrosive substances can considerably degrade the sturdiness of a reducing device. The Stanley 10-817 typically incorporates coatings or finishes on the blade and deal with to reinforce corrosion resistance. That is significantly necessary in environments the place the device could also be uncovered to humidity, saltwater, or chemical compounds. A knife utilized in plumbing or marine functions, for instance, requires enhanced corrosion resistance to forestall rust and keep its performance over time.
The sides of fabric composition, blade phase integrity, deal with building, and corrosion resistance collectively decide the general sturdiness of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. These components are interconnected, and a weak point in anyone space can compromise the device’s lifespan and efficiency. The “FatMax Xtreme” designation displays a deliberate engineering effort to maximise these facets, making a device that may stand up to the calls for {of professional} use and supply long-term worth.
5. Snap-off Mechanism
The snap-off mechanism is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately influencing its performance and person expertise. This mechanism permits the person to reveal a contemporary, sharp innovative by breaking off a boring phase of the blade, thereby eliminating the necessity for sharpening and lengthening the blade’s usable life.
-
Mechanism Parts and Operation
The snap-off mechanism usually contains a slider or push-button that advances the blade, a locking mechanism to safe the blade on the desired extension, and pre-scored segments alongside the blade’s size. To show a brand new innovative, the person extends the blade, aligns the boring phase with a chosen breaking level, and applies strain to snap it off, typically utilizing a built-in breaker or pliers. The effectiveness of this mechanism relies on the precision of the blade segmentation and the reliability of the slider and locking parts. A malfunctioning locking mechanism can result in blade slippage, posing a security hazard.
-
Security Options and Concerns
The design of the snap-off mechanism incorporates security options to attenuate the chance of damage. These options embrace a strong locking mechanism to forestall unintentional blade retraction, a contoured deal with for safe grip, and typically, a blade snapper to soundly break off boring segments. Nevertheless, the person should train warning when snapping off blade segments to keep away from cuts or flying particles. Correct coaching and adherence to security pointers are important for the secure and efficient use of this mechanism. The mechanism’s reliability contributes to the general security profile, the place a poorly designed mechanism may trigger unpredictable blade snapping.
-
Materials Composition and Sturdiness of the Mechanism
The supplies used within the snap-off mechanism’s building considerably impression its sturdiness and longevity. Excessive-quality metallic or strengthened polymers are sometimes employed to face up to the repeated stress of blade extension, retraction, and locking. The mechanism’s resistance to put on and tear immediately impacts the device’s lifespan and its skill to keep up constant efficiency over time. The Stanley 10-817 FatMax Xtreme, with its emphasis on sturdiness, usually incorporates strong supplies in its snap-off mechanism to make sure dependable operation beneath demanding circumstances. An affordable mechanism results in speedy put on, making the general device ineffective.
-
Upkeep and Alternative
The snap-off mechanism requires minimal upkeep, usually involving occasional cleansing to take away particles that would impede its operation. Nevertheless, the mechanism’s parts are topic to put on and tear, and ultimately, alternative could also be vital. The provision of alternative components and the benefit of disassembly and reassembly are components that affect the device’s long-term worth. A well-designed mechanism permits for simple blade alternative and, in some instances, component-level repairs, extending the device’s service life. The complexity of the mechanism can deter customers from making an attempt repairs, emphasizing the worth of a strong, long-lasting design.
In conclusion, the snap-off mechanism is an integral element of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately impacting its usability, security, and longevity. The design, supplies, and operation of this mechanism are important issues in evaluating the device’s total efficiency and suitability for numerous reducing duties. The mechanism’s reliability, mixed with correct person method, permits environment friendly and secure use of the device.
6. FatMax Xtreme Sequence
The “FatMax Xtreme Sequence” represents a product line from Stanley recognized for enhanced sturdiness and efficiency traits. The “Stanley 10-817 25mm FatMax Xtreme snap-off knife” is a selected product inside this sequence, inheriting the sequence’ design rules and materials selections meant to supply superior resilience in demanding functions. The sequence designation signifies the knife is engineered to face up to harsher circumstances and extra frequent use in comparison with normal Stanley choices. As an illustration, the deal with materials could also be upgraded to face up to larger impression forces, or the blade locking mechanism could also be strengthened to withstand put on. This affiliation results in an expectation of better reliability and prolonged lifespan for the knife. The combination of “FatMax Xtreme Sequence” parts within the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” creates a product designed for skilled use.
A sensible consequence of this connection is the knife’s suitability to be used in building, industrial, or different demanding environments. Professionals resembling electricians, plumbers, and carpenters typically require instruments able to withstanding each day use and potential publicity to harsh circumstances. The “FatMax Xtreme Sequence” designation indicators to those customers that the knife is designed to fulfill these necessities. The improved sturdiness traits present a level of confidence, probably lowering the frequency of replacements and minimizing downtime because of device failure. A industrial building crew, for instance, would possibly select the 10-817 because of its status inside the FatMax Xtreme lineup, resulting in fewer interruptions attributable to device malfunction.
In abstract, the “FatMax Xtreme Sequence” designation is a important element of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife,” influencing materials choice, design options, and total efficiency expectations. The connection implies a concentrate on enhanced sturdiness and suitability for demanding functions, translating to tangible advantages for skilled customers. Though challenges associated to device upkeep and acceptable utilization stay, the affiliation with the “FatMax Xtreme Sequence” gives a degree of assurance relating to the knife’s skill to face up to rigorous use.
7. Mannequin Identification (10-817)
The mannequin identification code “10-817” serves as a novel identifier for a selected configuration of the Stanley 25mm FatMax Xtreme snap-off knife. This code is essential for distinguishing this specific device from different related fashions inside the Stanley product line and for precisely referencing its specs, alternative components, and associated documentation.
-
Specification Precision
The “10-817” designation ensures that customers and retailers can exactly determine the device’s traits, together with blade width, deal with design, and particular options inside the FatMax Xtreme sequence. For instance, a components provider can use this code to verify {that a} alternative blade is suitable with the meant device, stopping errors in ordering and guaranteeing correct performance. The shortage of a exact identifier may result in the number of incompatible parts, affecting efficiency and security.
-
Guarantee and Help
The mannequin quantity is important for guarantee claims and buyer assist inquiries. Stanley and its licensed service suppliers use this code to confirm the device’s authenticity and decide the applicability of guarantee protection. The absence of a sound mannequin quantity or an try to say guarantee on a counterfeit product would seemingly lead to denial of service. This code safeguards each the producer and the buyer in opposition to fraudulent actions.
-
Stock Administration and Logistics
Retailers and distributors depend on the “10-817” designation for environment friendly stock administration and logistics. This code permits correct monitoring of inventory ranges, streamlined order processing, and correct categorization of the device inside product catalogs. Using standardized mannequin numbers reduces the chance of transport errors and ensures that clients obtain the proper product. An inaccurate or lacking mannequin quantity may disrupt provide chains and result in buyer dissatisfaction.
-
Product Documentation and Security Info
The “10-817” identifier is immediately linked to particular product documentation, together with person manuals, security directions, and technical specs. This documentation gives customers with important info on the right use, upkeep, and potential hazards related to the device. Entry to correct documentation is important for guaranteeing secure operation and maximizing the device’s lifespan. With no particular mannequin quantity, finding and referencing the proper documentation could be considerably harder, probably growing the chance of accidents or improper dealing with.
In conclusion, the mannequin identification code “10-817” is an indispensable factor of the Stanley 25mm FatMax Xtreme snap-off knife. It facilitates exact specification, guarantee assist, environment friendly stock administration, and entry to essential product documentation, contributing to the general reliability and worth of the device. This identifier just isn’t merely an arbitrary quantity however a key element of the product’s id and its integration inside the broader Stanley ecosystem.
Often Requested Questions
This part addresses widespread inquiries and considerations relating to the Stanley 10-817 25mm FatMax Xtreme snap-off knife, offering readability on its options, utilization, and upkeep.
Query 1: What distinguishes the FatMax Xtreme sequence from different Stanley snap-off knives?
The FatMax Xtreme sequence emphasizes enhanced sturdiness and robustness in comparison with normal Stanley knives. This usually interprets to stronger supplies within the deal with building, a safer blade locking mechanism, and an total design meant to face up to rigorous use and demanding work environments. The particular enhancements current within the 10-817 mannequin are aligned with this core precept.
Query 2: How does one safely eliminate snapped-off blade segments?
Snapped-off blade segments pose a laceration hazard and have to be disposed of responsibly. The really useful follow entails amassing the segments in a puncture-resistant container, resembling a heavy-duty plastic bottle or a chosen sharps container. This container ought to be clearly labeled to point its contents and disposed of in accordance with native laws for sharp waste disposal.
Query 3: What kind of blade alternative is really useful for the 10-817 mannequin?
The Stanley 10-817 25mm FatMax Xtreme snap-off knife is designed to simply accept 25mm snap-off alternative blades. It’s advisable to make use of real Stanley alternative blades or these particularly really useful by Stanley for optimum efficiency and security. Utilizing non-compatible blades might compromise the knife’s performance and improve the chance of accidents.
Query 4: What upkeep is required to make sure the longevity of this device?
Minimal upkeep is required for the Stanley 10-817. Common cleansing to take away gathered particles from the blade slider and locking mechanism is really useful. A dry material is usually enough; keep away from utilizing extreme lubricants, as they will entice filth and hinder the mechanism’s operation. Inspecting the blade locking mechanism periodically for indicators of damage or harm can also be advisable.
Query 5: What are the first security precautions to watch when utilizing a snap-off knife?
Security precautions embrace all the time retracting the blade totally when not in use, utilizing acceptable private protecting tools resembling gloves and eye safety, and snapping off blade segments fastidiously and away from oneself and others. By no means apply extreme pressure when reducing, and all the time make sure the workpiece is securely supported. A pointy blade is safer than a boring blade, as much less pressure is required.
Query 6: Can the blade locking mechanism be adjusted or tightened if it turns into free?
The blade locking mechanism within the Stanley 10-817 is usually not designed for person adjustment. If the locking mechanism turns into free or fails to securely maintain the blade, it might point out put on or harm. In such instances, the device ought to be inspected by a certified technician or changed to keep away from potential security hazards. Trying unauthorized repairs might void the guarantee and compromise the device’s integrity.
In essence, accountable use, correct disposal, and adherence to security pointers are paramount when working the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
The next part will elaborate on sensible functions of the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
Optimizing Utility
To maximise the efficiency and lifespan of this device, adherence to particular pointers is really useful. The next suggestions promote secure and environment friendly operation.
Tip 1: Choose Acceptable Blade Extension. Lengthen the blade solely to the minimal size required for the duty at hand. Extreme extension will increase the chance of blade breakage and compromises reducing precision. Make sure the locking mechanism is totally engaged earlier than making use of strain.
Tip 2: Make use of Appropriate Slicing Angle. Preserve a shallow reducing angle to attenuate stress on the blade. Keep away from twisting or bending the blade throughout use, as this could result in untimely put on or fracture. Use a managed, deliberate movement.
Tip 3: Make the most of Acceptable Slicing Floor. Make use of an acceptable reducing floor, resembling a self-healing mat or a chunk of scrap materials. Keep away from reducing immediately on arduous surfaces like concrete or metallic, as this dulls the blade quickly and will increase the chance of slippage.
Tip 4: Preserve Cleanliness. Repeatedly clear the blade and the inner mechanism to take away gathered particles. Use a dry material to wipe down the device after every use. Keep away from utilizing solvents or lubricants that would degrade the plastic parts.
Tip 5: Get rid of Blade Segments Responsibly. Acquire snapped-off blade segments in a puncture-resistant container. Securely seal the container and eliminate it in accordance with native laws for sharps waste. By no means discard free blade segments generally trash receptacles.
Tip 6: Retailer the Knife Safely. When not in use, totally retract the blade and interact the locking mechanism. Retailer the knife in a chosen location away from kids and unauthorized customers. Think about using a device pouch or holster for secure transport.
Tip 7: Substitute Blades Promptly. Substitute the blade when it turns into boring or broken. Trying to pressure a boring blade will increase the chance of slippage and damage. Use solely real Stanley alternative blades or these particularly really useful for the 10-817 mannequin.
Adhering to those pointers extends the service lifetime of the knife, and enhances person security. Correct dealing with and storage are important.
This concludes the sensible suggestions part. A summation of the important thing factors of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” follows.
Conclusion
This exploration of the Stanley 10-817 25mm FatMax Xtreme snap-off knife has detailed its key options, encompassing blade segmentation, ergonomic deal with design, blade width issues, inherent sturdiness, the performance of its snap-off mechanism, its affiliation with the FatMax Xtreme sequence, and the importance of its mannequin identification. It has established the device as a mix of sensible design components meant to fulfill skilled wants, providing a steadiness between utility, security, and longevity.
In abstract, the Stanley 10-817 capabilities as a consultant of its device class, embodying design selections tailor-made to maximise effectivity and stand up to demanding use instances. Its worth proposition rests in its skill to ship constant efficiency with acceptable dealing with. As device designs evolve, the rules evident on this mannequin might proceed to tell future improvements. The person’s adherence to security pointers and really useful practices stays paramount in realizing its meant advantages.
